Troubleshooting and troubleshooting: First of all, when the grinding mill is installed for the first time, the foreign objects in the tank should be removed first, and the large pulley should be turned to confirm whether it rotates flexibly and whether the belt is properly tight. 

Start the inspection to confirm that the belt is running in the correct direction (the correct direction is clockwise when looking down). Make sure that the belt is free of scratches, and then officially start. If the above problems occur during the operation of the grinding mill, the belt should be removed, and the stirring parts should be disconnected for separate investigation. 

The routine inspection part is the motor, the verticality of the motor shaft should be checked, the structure between the motor and the plate, the plate and the bracket is in good condition, the motor can be tested separately for wiring, and the small pulley can be visually checked to see if the operation is stable. 

Influenced by factors such as lubrication, if necessary, please ask professional motor maintenance personnel to carry out maintenance.