Tagi - geyser
VapX, a new Chinese manufacturer, has launched a large pod called the Geyser. Powered by a rechargeable 21700 battery, it comes with 2 tanks: one that holds 5 ml and the other 6.5 ml. Its compact size makes it comfortable to hold and its airflow setting is great for fine tuning.To get more news about vapx geyser s kit, you can visit urvapin official website.
The Geyser is a pod mod capable of delivering 100 W from a rechargeable 21700 battery. The tanks hold a generous 5 ml and 6.5 ml - perfect if you don't like refilling cartridges too often. Its best feature is the huge range of airflow ring settings - just turn the disc to choose.
The top of the Geyser features a button set into a plate. Push this button to release the cartridge hatch. Just pull the plate to remove the tank from the body of the box. It's well thought out and practical. There is also a plastic loop so you can fit a neck strap. That's all good in theory, but it doesn't come with a neck strap or lanyard! It's a pity because apart from this oversight, the kit is pretty complete.
The drip tip is designed exclusively for the Geyser and is held in place by a seal at the top of the cartridge. On one of the cartridges we tested, the seal wasn't tight enough and tended to pinch when we were fitting the drip tip. What a shame!
The "+" and "-" buttons are just under the screen and are nicely built in. They don't move around at all and feel quite solid.
The fire button is right above the screen. It sits flush with the body of the mod. It has a wide touch pad, but pressing the top of it does not start the vape. This isn't a problem when you're using it, unless you press this part on purpose.
There's a USB C port on the body of the mod so you can update the chip set or recharge the battery. The position of the port means the pod mod will stay upright when it's plugged in. Finally, it comes with a 1.2 m long cable. So it's goodbye to those too-short USB cables!
To access the battery compartment, just slide off its cover. The fit is excellent and holds the battery in place perfectly. The polarity is clearly marked inside the battery compartment by a coloured dot.
This comes in two different kits. One is supplied with the 21700 battery, the other comes without a battery. The Geyser comes with the battery already fitted, but the positive pole is protected by an insulating strip which you have to remove before you first use it. On the up side, the battery arrives fully charged.
The coloured screen is quite bright. The information is clear and well laid out. There are several menus, such as for wattage, temperature control and a bypass function. These options are very useful because the optional 510 mounting plate lets you fit your own resistance coils.
The VapX Geyser S is the manufacturer's second model. Smaller and more lightweight than its predecessor, it retains the qualities of the Geyser, but is considerably easier to use. With a built-in 1500 mAh battery, this pod is user-friendly.To get more news about vapx geyser s kit, you can visit urvapin official website.
A small-scale Geyser
The Geyser S is the Geyser‘s little brother. Smaller and more compact, it operates with a built-in 1500 mAh battery. With a potential output of up to 50 W, it has retained the original circular airflow control system. A nice product for moderate direct vaping.
The Geyser S has channelled the spirit of the Geyser but in a much more compact format. The overall shape is somewhat reminiscent of the original. The finishes are impeccable and adjustments down to the nearest millimetre. You can feel the quality of the product in your hand. It is both strong and lightweight.
On the side of the Geyser S, you will find the screen, trigger button, "+" and "-" buttons to adjust the pod settings, and the USB C port for recharging or updating the chipset. It is small, but perfectly formed. The buttons don't rattle annoyingly.
VapX has kept all the key features while making clever changes that make the Geyser S particularly user-friendly. The Geyser's cover system has been omitted in exchange for more conventional filling port access. The filling port is covered by a small silicone seal. The hold is excellent and the opening wide enough for most bottle tips.
On the other hand, the tank must be filled slowly, otherwise it may overflow, especially with larger tips. The cartridge capacity is 3.2 ml, which is more than decent in view of the size of the pod. Another advantage, in spite of the somewhat opaque colour, is that you can see the level of liquid at all times without removing the tank.
This model also includes the circular airflow control feature. That's a good thing. It is precise and effective. Unlike its bigger counterpart, it only features a single rotary disc instead of two. However, the Geyser S, with its 0.25 Ohm resistance coils, has no need for an additional air supply. The flow is adjusted by rotating the disc to allow more or less air to pass. The disc is solid but easy to rotate. Once set, it won't move of its own accord, ensuring a precise selection.
The drip tip size is 510, and can be replaced by any standard model. This is an added bonus as it allows some customisations. The drip tip supplied feels great in the mouth and is wide enough to allow a decent amount of unrestricted vapour.
Below the cartridge, you will find two indentations, meaning that the resistance coil can only be fitted in one direction. You won't be able to position the coil the wrong way, even if you try to force it. Once the resistance coil is fitted in its housing, there will no leakage or seepage from the pod. Which is a plus!
Vapx Geyser S 50W POD System Kit is a slide-in pod device. Vapx Geyser S 50W POD Kit works with built-in 1500mah battery with Buck-Boost function to provide stable output. Vapx Geyser S cartridge maintains 3.2ml see-through e-juice tank with top filling design and 0.25ohm single Air mesh coil, which is compatible with Geyser dual AFC 45W pod. Vapx Geyser S pod features stepless AFC airflow control mechanism with 3D airflow to support Loose MTL and Restricted DTL vaping.To get more news about vapx geyser s kit, you can visit urvapin official website.
Features:
Internal 1500mah built-in battery
Buck-Boost, stable output to deliver consistent vaping
Single Air Mesh coil for dense flavor
Stepless AFC airflow control mechanism, 3D airflow, medium cloud
Support Loose MTL and Restricted DTL vaping
Slide-in pod switching action
Top-filling design with 360° see-through e-juice tank
Compatible with Geyser dual AFC 45W pod
eleaf istick s80
Dettagli:
Eleaf iStick S80 Kit è un nuovo membro della popolare serie iStick. Consiste del Eleaf iStick S80 box mod e dell'atomizzatore Eleaf GZeno. Il kit Eleaf iStick S80 applica il design intrecciato alla finitura metallica, conferendo una consistenza e un lusso senza precedenti. Con un design metallico e compatto, ti darà la sensazione della mano più solida e confortevole. Alimentato dalla batteria integrata da 1800 mAh, può generare fino a 80 W di potenza massima. E caricato tramite una porta veloce di tipo C 2A sicura e affidabile, ti aiuta anche a risparmiare tempo. Inoltre, sono disponibili 2 modalità: Smart Mode e Power Mode. Inoltre, è compatibile con l'atomizzatore GZeno da 3 ml, che viene fornito con la bobina GZ da 1.2ohm per lo svapo MTL e il sapore puro. E adotta un comodo riempimento superiore e una regolazione precisa del flusso d'aria con 5 fori del flusso d'aria.
Caratteristiche:
1. Batteria da 1800 mAh a lunga durata
2. Ricarica rapida di tipo C
3. 80 Watt di potenza massima in uscita
4. Schermo TFT da 0,96 "di facile lettura
5. Capacità massima del succo di 3 ml
6. Comodo metodo di riempimento dall'alto
7. Controllo del flusso d'aria inferiore a cinque livelli
8. Compatibile con Eleaf GZ Coils 1.2ohm
9. Progettato per lo svapo MTL
geyser s vapx
Dettagli:
Vapx Geyser S 50W POD Kit è un dispositivo pod a scorrimento. Il kit VapX Geyser S Pod è alimentato da una batteria integrata da 1500 mAh che supporta una tecnologia di uscita stabile dall'1 al 100% per uno svapo stabile. Dotato di schermo di visualizzazione chiaro, il kit VapX Geyser S Pod mostra sempre la data di svapo. E il VapX Geyser S Pod sistema è dotato di Geyser S Pod da 3,2 ml. Inoltre, il Geyser S Pod è dotato di bobina a rete d'aria singola da 0,25ohm per un sapore denso. Con il sistema 3D Airflow e il semplice design di ricarica superiore, il dispositivo VapX Geyser S ti offrirà un MTL sciolto e uno svapo DTL limitato. Oltre alla ricarica rapida di tipo C, il VapX Geyser S richiederà molto tempo e una meravigliosa esperienza di svapo.
Caratteristiche:
Batteria interna da 1500mAh incorporata
Buck-Boost, output stabile per fornire uno svapo costante
Bobina Single Air Mesh per un sapore denso
Meccanismo di controllo del flusso d'aria AFC continuo, flusso d'aria 3D, nuvola media
Supporta lo svapo MTL sciolto e DTL limitato
Azione di commutazione pod a scorrimento
Design a riempimento superiore con atomizzatore e-juice trasparente a 360 °
Compatibile con il pod Geyser dual AFC 45W
Potresti essere interessato ai seguenti due elementi:
Eleaf iStick Rim
Smoant Pasito
Se vuoi saperne di più:https://it.vapormo.com/
